1. Home
  2. Resources
  3. EN 10204 3.1 certificates
Guide · EN 10204:2004

EN 10204 3.1 certificates, explained

Buyers of brass parts often ask for an “EN 10204 3.1” or a “3.1 MTC”. This is what the four document types in the standard mean, what a 3.1 for brass rod shows, and what it does and does not cover for a finished part.

Updated  · AirGrip, Jamnagar

The four document types

TypeDocumentTest resultsValidated by
2.1Declaration of compliance with the orderNoneThe manufacturer
2.2Test reportFrom non-specific inspectionThe manufacturer
3.1Inspection certificate 3.1From specific inspectionThe manufacturer's authorised inspection representative, independent of the manufacturing department
3.2Inspection certificate 3.2From specific inspectionThe manufacturer's independent inspection representative and the purchaser's representative, or an inspector designated by regulations

Specific inspection is done on the products to be supplied, or on test units of which they form part. Non-specific inspection is done on products of the same type made by the same process, not necessarily from your delivery. That is the difference between a 2.2 and a 3.1: the 3.1 reports tests on your material.

3.1.B and the other 1991 names

EN 10204:1991 → EN 10204:2004

1991 edition2004 edition
2.12.1
2.22.2
2.3Withdrawn
3.1.A3.2
3.1.B3.1
3.1.C3.2
3.23.2

Drawings and purchase specifications written before 2004 often still say 3.1.B. They mean what the current edition calls 3.1.

What a 3.1 for brass rod shows

  • The material and its standard, for example CW614N to EN 12164, with the condition (such as R430) and the bar size.
  • The cast (heat) number, which ties the certificate to the bars delivered.
  • The chemical composition from the cast analysis.
  • Mechanical test results for the condition ordered: tensile strength, proof strength and elongation, or hardness.
  • A statement that the product complies with the order, signed by the authorised inspection representative.

When you check one: every element should be inside the limits of the grade (for CW614N and CW617N see CW614N vs CW617N), the condition should match the drawing, and the cast number should match the delivery.

What it covers for a finished part

The rod's 3.1 certifies the material. It says nothing about the dimensions, threads or plating of a part turned from that rod. Those are covered by the part maker's own documents: an inspection report against the drawing and a certificate of conformity. Traceability joins the two: the lot number of the parts should lead back to the cast number on the rod certificate.

What we send with brass parts:

DocumentWhen
Mill test certificate (rod), EN 10204 3.1Each batch
Final inspection reportEach batch
Certificate of conformityEach batch
Plating thickness reportPlated batches
Initial sample inspection reportWith samples
PPAP submission, Level 3With samples, on request

Our lot numbers are linked to the rod heat number on every record and label. More on how parts are checked: Quality.

How to ask for it

Put the certificate type on the drawing or the order, next to the material:

Material: CW614N (CuZn39Pb3) to EN 12164, R430
Certificate: EN 10204 3.1

If your specification needs a 3.2, say so at enquiry: it needs a second inspector, from your side or a third party, to take part in the inspection.

Questions

What is the difference between a 3.1 and a 3.2 certificate?
Both report results of specific inspection. A 3.1 is validated by the manufacturer's own inspection representative, independent of manufacturing. A 3.2 is validated by that representative and also by the purchaser's representative or an inspector designated by regulations.
Is 3.1.B the same as 3.1?
Yes. 3.1.B is the name used in EN 10204:1991; the 2004 edition calls the same document 3.1.
What is an MTC?
A mill test certificate: the inspection document the material mill issues for the bar or sheet it supplies, often to EN 10204 3.1.
Does a 3.1 certificate prove the dimensions of my part?
No. A rod certificate covers the material. Dimensions are shown by the part maker's inspection report against your drawing.
Who signs a 3.1 certificate?
The manufacturer's authorised inspection representative, who must be independent of the manufacturing department.
Do you supply a 3.1 certificate with brass parts?
Yes. An EN 10204 3.1 mill test certificate for the rod comes with every batch, together with the final inspection report and a certificate of conformity.